Gasket Roll Materials

A non-asbestos homogeneous gasket material produced by the beater-addition process. This material is manufactured with a blend of nitrile latex and fibrous reinforcing materials. A high-density material with good fluid resistance and dimensional stability and flexibility. Suitable for higher-temperature applications - always test first! Actual temperature performance can vary according to many factors.

Commonly used for general purpose automotive and small motor gaskets.

NAMED Gasket Paper, Beater Add Paper, Cellulose Fiber Beater Addition
RESISTS Fuel, Oils, Gasoline, Water, Alcohol, Grease, Air, Gas, Naptha, Kerosene, Benzene, Most Solvents
DAMAGED BY High Heat, Steam

COLOR: Gray-Black TEMP RANGE: to +480°F / to +245°C FINISH: Smooth

An economical highly compressible material that is also very resilient. Neoprene cork sheet has excellent working temperatures and offers good resistance to fuels, grease and oils. Highly reliable gasket material for the electric and automobile industries.

Color: Flecked / Dark Finish: Rough

A blend of Cork and Nitrile Rubber (also known as Buna-N). Very good oil, aromatic fuel, and solvent resistance. Cork & buna sheet has the compressibility of cork and the flexibility of rubber. Medium compressibility makes an excellent sealing material with relatively high tensile strength. Cork-and-rubber cuts easily. Strong and flexible. Ideal for making gaskets with narrow flanges.

• High compressibility
• Noise, vibration insulator
• Impact resistant

NAMED Cork & Nitrile
RESISTS Oils, Fuels, Greases, General Solvents, Impacts, Slippage, Fluid Penetration, Wear
DAMAGED BY High Heat, Steam

An economical highly compressible material that is also very resilient. Synthetic rubber and cork sheet has excellent working temperatures and offers good resistance to fuels, grease and oils. Highly reliable gasket material for the electric and automobile industries

Color: Flecked / Dark Finish: Rough

Excellent resistance to Ozone, UV / sunlight - great for outdoor applications. Long service life. Ideal general purpose gasket material for air, hot and cold water, saturated steam.

Poor resistance to fuels and oils.

Used for parts in the appliance industry, low pressure boiler gaskets, weather stripping, vibration pads, mounts, etc.

Color: Black Temp Range: -40°F +225°F  | -40°C +107°C  Finish: Smooth Durometer: 60 ±5

• Excellent abrasion and flex/fatigue resistance
• Flame and oil resistant
• Exceptional weather resistance
• Ozone resistant synthetic rubber
• For petrochemical applications

Peroxide curing EPDM improves heat performance, improving the stability of the material. Peroxide cured EPDM is used in water, food and beverage applications.

Peroxide cured EPDM exhibits resistance to alcohols, hot water, ketones, steam and more.

This material is NOT RECOMMENDED for fuels, greases, mineral oil, gasoline, petroleum oil and grease, and hydrocarbon environments.

Color: Black Temp Range: -55°F to +300°F / -48°C to 148°C Finish: Smooth

FDA compliant EPDM provides very good abrasion resistance and is resistant to oily and greasy food products. Described for repeated food contact. very good abrasion resistance. Excellent temperature cycle performance. Non-toxic, non-allergenic materials.

Color: White Temp Range: -40°F to +230°F / -40°C to +110°C Finish: Smooth Duro: 60 Shore A ±5

Excellent heat stability and resistance to fuels and chemicals.

Color: Black Temp Range: to +250°F / to +120°C Finish: Smooth

Neoprene resists degradation from sun, ozone and weather and performs well with oils and chemicals. Neoprene sheet maintains its strength, flexing, twisting and elongation very well over a wide temperature range while having outstanding physical toughness. Many grades of neoprene are available depending on the application.

NAMED Neoprene, Chloroprene, Polychloroprene
RESISTS Fuels, Oils, Petrochemicals, Many Chemicals, Abrasion, Impact
DAMAGED BY Hydrochloric Acid, Acetone, Xylene, Acetic Acid, Aqua Regia, Bboric Acid, Liquid Butane, Hydrogen Peroxide, Iodine, Kerosene, Lacquer, Lard, Motor Oil, Nitric Acid, Palm Oil, Tallow, Turpentine, Urine, Chlorine-Based Chemicals

Color: Black Temp Range: -20°F to +170°F | -28°C to +76°C Finish: Smooth

Neoprene is a tough, reliable material - one of our most popular selling materials. 

FDA Compliant Neoprene demonstrates good abrasive qualities and resistance to oils and greases. Excellent resistance to ozone breakdown. Non-toxic, non-allergenic materials. Long life, repeated temperature cycling. Non-marking.

Color: White Temp Range: +180°F / To +82°C Finish: Smooth Duro: 60 Shore A±5

Nitrile / NBR Rubber (often referred to as buna-N rubber or perbunan) is the most commonly used elastomer in the seal industry. Widely used in hydraulics and pneumatics.

NAMED Nitrile, Buna-N, Perbunan, Acrylonitrile Butadiene, NBR,
RESISTS Petroleum Oils, Gasoline, Hydraulic Fluids, Fats, Animal & Vegetable Oils, Grease, Water, Air, Heat, Abrasion
DAMAGED BY UV Exposure, Direct Sunlight

COLOR: Black TEMP RANGE: -20°F to +180°F / -28°C to +82°C FINISH: Smooth DURO: 60 Shore A ±5

Nitrile rubber (Butadiene Acrylonitrile (NBR) ) is recommended in all phases of food processing and manufacturing of pharmaceuticals and cosmetics. Excellent oil resistance and temperature range. Non-toxic, non-allergenic materials. Long life, repeated temperature cycling. Non-marking.

Color: White Temp Range: -25°F to +220°F / -32°C to +104°C Finish: Smooth Duro: 60 Shore A ±5

SBR with 4 oz. reinforcing polyester fabric imbedded.

Material: SBR Insert: 4 Oz. Polyester Fabric  Color: Black Temp Range: to  -20°F to +170°F  | -29° C - +76°C Finish: Smooth

A high-strength polymer 14.5 oz. nylon fabric is used to reinforce this neoprene sheet.

Color: Black Temp Range: -20°F to +200°F | -28°C to +93°C

• Abrasion resistant and durable
• Widely use for flange gaskets
• High strength 14.5 oz. polymer fabric

Neoprene Sheet with Nylon Cloth Reinforcing Insert - Abrasion resistant and durable performance.

Low volatile, peroxide-free. Extended shelf life - greater than natural or synthetic rubbers.

• Stays soft and flexible
• 
  

NAMED Silicone Rubber, Polysiloxane - TA
RESISTS Acids, Weather, Water, UV / Sunlight, Ozone, Oxidation, Staining
DAMAGED BY Hydrocarbons, Ketones, Solvents, Impact, Abrasion

Color: Red-Orange Temp Range: to  -65°F to +450°F | -50°C to +232°C Finish: Smooth

Can bend around a rod with a diameter of twice the thickness of the material without cracking, breaking or excess marring of the surface. Wow! Material saturated with a glue-glycerine. Impregnant rendered insoluble by means of a tanning agent (formaldehyde). For all-around use, general purpose, flange gaskets, etc. Good sealability and excellent conformability to compensate for flange distortion.

NAMED Vegetable Fiber, Detroiter Gasket Material
RESISTS Fuel, Oils, Gasoline, Water, Alcohol, Grease, Air, Gas, Naptha, Kerosene, Benzene, Most Solvents
DAMAGED BY High Heat, Steam

COLOR: Tan TEMP RANGE: to +250°F / to +120°C FINISH: Smooth

A general service SBR rubber compound of excellent quality. This heat resistant material has been calendared and vulcanized under the strictest control. Recommended uses: popular flange gasket material for hot or cold water and air. All mating flanges wherever a quality rubber sheet is required. Deforms to uneven flanges.

• Elongation: 150%
• Tensile Strength: 400 PSI
• Specs: ASTM D - 1330 - Class 11 / ASTM D - 2000 - Type - AA

NAMED Red Rubber, SBR, Styrene Butadiene, Buna S
RESISTS Heat, Aging, Wear, Water, Alcohols, Organic Acids, Ketones, Aldehydes
DAMAGED BY Ozone, Fats, Oils, Strong Acids, Grease, Hydrocarbons, UV

Color: Red Temp Range: -20°F to +170°F / -28°C to +76°C Finish: Smooth Duro: 75 Shore A ±5